TANKS car antifreeze liquid, no water antifreeze liquid is hot sale now! TANKS five prevent non-freezing fluid ingredient is ethylene glycol aqueous solution and distilled water, and add rust and anti-scaling additives, the low temperature of 55 ℃. TANKS five non-freezing fluid characteristic of the five prevention efficacy: anti-rust, anti-corrosion, anti-scaling, anti-boiling, antifreeze, can make full protection of the cooling system, can effectively reduce the vehicle, machinery and equipment abnormal situation occurs, prolong the service life of the engine system.
The basic knowledge of antifreeze is popularized below:
Is the full name of antifreeze antifreeze coolant, meaning anti-freezing function of cooling fluid, due to the freezing point of antifreeze has lower and higher boiling point, not only has the function of antifreeze, and very good cooling effect, the winter can avoid ice crack because of the low temperature ,lead to water tank and cooling system in the hot summer effectively avoid the phenomenon of "boiled". The antifreeze must have the following three basic functions:
1. Anti-freeze, because the antifreeze liquid has a lower freezing point, it is not allowed to break up the water tank and cooling system due to the icing in the cold winter.
2. Anti-corrosion, the engine and its cooling system are made of metal, copper, iron, aluminum, steel and solder. These metals at high temperature and cooling water contact, after a long time will be eroded, and high-quality antifreeze will not cause corrosion to the engine cooling system, but also have anticorrosive, antirust function.
3, prevent boiling functions, the boiling point of water is 100 degrees, the boiling point of antifreeze basically all above 110 degrees, so in the hot summer, antifreeze is more difficult than water boiled, can effectively prevent water boiled phenomena appear.
4, the antifreeze solution can prevent scale, the metal surface of water tank and water jacket will be accompanied by scale, these stubborn water scale not only hard to clean, but also will make the engine heat less effective. The high quality antifreeze is made of distilled water and added with anti-scale additives, has the function of removing the stubborn scale. Of course, if the rust is thick and thick, it is impossible to remove the clean water with the antifreeze solution, and the water tank cleaning agent should be cleaned before adding the high quality antifreeze.
How to choose antifreeze solution correctly?
1. Select the freezing point of the antifreeze liquid based on ambient temperature conditions. The freezing point of antifreeze is one of the most important indicator of antifreeze, is an important condition of antifreeze can prevent frostbite, usually the freezing point of antifreeze should choose 5-10 ℃ lower than the local lowest temperature environment.
2. Choose antifreeze fluid according to different requirements of vehicle and machine equipment. In general, imported vehicles, machinery and equipment, domestic imported production vehicles, and high-grade vehicles should choose long-acting antifreeze fluid (2-3 years). Ordinary vehicles can choose ordinary antifreeze fluid.
3. It is usually used for anti-corrosive, anti-scaling and anti-corrosive functions.
4. Select the antifreeze solution that matches the rubber seal catheter.
5. Select regular manufacturers with the inspection report of the car with anti-freeze liquid, industrial antifreeze liquid.
How to use antifreeze properly?
1. Make sure to do a careful cleaning of the engine before adding the antifreeze solution. This is because the high quality antifreeze containing corrosion inhibitor and detergent, join after the antifreeze, the original scale after contact with antifreeze in the engine system, lead to clogging pipes, waterways or precipitation elbow part at the bottom of the tank, heat dissipation caused by uneven, antifreeze can't circulation, make the engine temperature too high. In order to prevent this from happening, the injection of antifreeze liquid must be thoroughly cleaned for the engine.
2. Check whether the cooling system of the engine is leaking and be eliminated in time.
3. No direct injection of antifreeze solution.
4. Antifreeze solution of different brands can not be mixed.
5. Regular inspection should be carried out during the use of antifreeze liquid.